Enter all your album metadata in manually. Storage is cheap and you can always create compressed audio files later. Choose the highest fidelity option and don’t apply any compression.
#Behringer analog to digital video converter software
Launch your audio recording software and set your recording quality and other parameters. Everything you hear when you play a record is going to show up on the digital recording, so that’s something to keep in mind.Ĭonnect your turntable output to your computer’s 1/8″ audio input or USB input, depending on your set up. Obviously, your vinyl is in pristine condition, so you don’t have to worry about scratches or pops. We’re not saying to go out and get a diamond tip needle, and just because your gear is old, doesn’t mean it’s bad. Generally, the better the gear the better the sound. The quality of the recording is only as good as your gear. You can also grab felt feet or a slip mat to level and stabilize your setup.
It’s the little things that will make all the difference in a quality recording. … vinyl can only be recorded in real time.īefore you get started converting vinyl to digital, make sure your turntable is level and your needle is clear of fluff. It’s worth it for the sound of vinyl but… It comes with an analog-to-digital converter and has a USB output. If you have a preamp in your setup at home, grab the Behringer UCA222. Your best bet for making this process as smooth as possible is to grab an all-in-one option like the Behringer UFO202 USB Audio Interface with a phono preamp built in.
Next up is a USB output so you can connect your audio to your computer. It converts an analog signal into a digital signal. To bring over your phono signal to your computer, you’ll also need an analog-to-digital converter. This is what a phono preamp does and if you have your turntable hooked up to an audio system, you probably already have a phono preamp in play. This signal needs to be converted to an AUX signal before it can get hooked up to a sound system, or, in our case, an audio output. Turntables produce a phono output signal. If you don’t have a USB turntable, read on.
A phono preamp, an analog-to-digital converter and USB output Make sure you have the correct cable to connect your turntable to your computer, like a USB cable or a USB to 1/8″ audio input. Lots of turntables have a phono preamp, an analog-to-digital converter and USB output built in, and you’re going to need these components to rip your vinyl. If you have a USB turntable, you can skip number three. So will Audacity, a free, open-source audio editor. Here are the basics of the setup you’ll need. There are a few different hardware setups you can use to get that warm analog sound onto your smartphone. But of course, you, as a lover of LPs, already possess all of those qualities. Ripping vinyl isn’t as easy as ripping CDs (assuming your computer still has a disc drive and if not, remember those?) and transferring the sound of vinyl to digital requires a bit of care, attention and patience. The good news is that you can take your collection anywhere if you rip it to digital.īefore we get ahead of ourselves here, let it be known: this is a labor of love. Sometimes, it feels like the only thing vinyl lacks is portability. The crisp sound of vinyl, the large-scale album artwork, the rarity, the whole physical collection part of it. There are many reasons why you might prefer vinyl to digital.
0 kommentar(er)
